This state resource locator contains information on the beneficial use of industrial byproducts for the state of North Dakota. Also included are EPA and private industry resources.
North Dakota Beneficial Use Policy
A written Beneficial Use Variance must be received from the Department before inert waste beneficial use may begin. The source, type, and characteristics of your waste will determine which rules apply. Applications must be thorough and complete to be considered. Call the Department's Solid Waste Program at (701) 328-5166 to coordinate your application with a Department.
Applicable North Dakota Agency/Division
Division Of Waste Management, Solid Waste Program.
North Dakota Definition of Beneficial Use
Materials Approved for Beneficial Use
Below is a listing of materials and beneficial uses that have been approved either on a case-by-case or pre-approved basis. This list of pre-approved and case-by-case uses is not an exhaustive list of all materials being beneficially used in a state. Some states also may have additional materials in use under a statutory exemption or through allowances in state rules. Before implementing the beneficial use of any material, you should contact the Division Of Waste Management, Solid Waste Program. You may be required to submit an application form, implement certain management practices, provide periodic reports or meet other requirements. (Click on the approved material to find other states that have also approved this material.)
More North Dakota Information
- Beneficial Use Application Form Please read the Department's Inert Waste Disposal Variance Guideline before completing this beneficial use application. In addition, applicable portions of the state solid waste management regulations should be referenced in completing the applications.
- ND Solid Waste And Recycling Association The North Dakota Solid Waste and Recycling Association is a non-profit organization that formed to educate, train, and promote environmentally sound waste management practices.
- Developing Beneficial Use Rules for Coal Combustion Byproducts (2001) (PDF) (7 pp, 31K)
- Guideline 38, Beneficial Use of Inert Waste Inert waste includes, but is not limited to construction and demolition material such as metal, wood, bricks, masonry and cement concrete; asphalt
concrete; metal; tree branches; bottom ash from coal-fired boilers; and waste coal fines from air pollution control equipment.
- Guideline 21, Scrap Tire Management Recycling tires includes processing tires into crumb rubber for play grounds, pavement surfaces, athletic track surfaces. Approved engineering uses of shredded tires include use as drainage fields, landfill construction, low weight fill, etc.
- Construction and Demolition State Waste Resource Locator. Use this tool to locate regulatory information and other compliance assistance and P2 resources.
- Solid Waste Locator. The solid waste resource locator contains links to regulatory agencies and rules covering solid waste topics.
- The Association of State and Territorial Solid Waste Management Officials (ASTSWMO) 2006 Beneficial Use Survey Report (11/2007). ASTSWMO’s Solid Waste Subcommittee established the Beneficial Use Task Force (Task Force) to study how States are managing requests to use non-hazardous, industrial solid wastes rather than dispose of them in landfills. The Task Force’s primary goal is to collect and share information that will assist States and Territories in developing or improving programs and processes to handle these requests.
- Associated General Contractors of America Environmental Services. AGC provides environmental information, networking opportunities and effective advocacy for construction professionals. AGC publishes on-point articles and fact sheets on key environmental actions, deadlines, requirements and initiatives that may impact the construction industry. AGC organizes an annual Contractors Environmental Conference and holds educational webinars on hot topics. In addition, AGC regularly disseminates environmental news via social media on Twitter (@AGCEnvironment). AGC sponsors and contributes to the Construction Industry Compliance Assistance Center, which is the association’s “go-to” resource on federal and state environmental requirements that affect construction activities. AGC advocates on behalf of its members in the regulatory and legislative arenas. AGC invites its members to join its Environmental Forum to stay informed, connect and take action on critical issues.
- EPA’s Methodology for Evaluating Beneficial Uses of Industrial Non-Hazardous Secondary Materials presents their approach for evaluating a wide range of industrial non-hazardous secondary materials and their associated beneficial uses.
- Northeast Waste Management Officials Beneficial Use Determination Database. A password-protected tool for state environmental regulators, this national database contains a compilation of approved state beneficial use determinations (BUDs).
- Industrial Resources Council. The Industrial Resources Council’s website is an information portal to help project designers, engineers, landscapers and other professionals achieve sustainability goals. Information is provided for the following wastes types: coal combustion products, foundry sands and slags, iron and steel slag, C&D materials, scrape tires, and pulp and paper industry materials.
- Construction Materials Recycling Association (CMRA). CMRA promotes the safe and economically feasible recycling of the more than 325 million tons of recoverable construction and demolition (C&D) materials that are generated in the United States annually. Use their locator tool to find a recycler in your state.
Last update: 9/15/2010